Securifi Peanut Plug
Power Monitoring Switch
Verified by Securifi- User Tested
- Simple 1 Minute Setup
- Remotely turn appliances on/off; monitor and save energy by identifying energy hogging devices in minutes
- Free Almond app for iOS & Android; also controllable via a standard web browser
- Works with lights, washers, dryers, heaters, in-wall air conditioners, fans, TVs, game consoles
- Requires Almond 3, Almond+ or Almond 2015
Product Description
Super Simple 1 Minute Setup
Tap “Add Device” → “Add” on the LCD Interface of Almond+ or Almond 2015 and plug into a power socket to pair it with the router. Once added, the plug will remain paired even when removed from one socket and added to another.
Turn Lights and Appliances On/Off from Anywhere
Add Peanut Plugs to the Almond+ or Almond 2015 to control and monitor appliances from anywhere in the world using our Free Almond iOS and Android apps. Works with washers, dryers, heaters, in-wall air conditioners, fans, TVs, game consoles, etc.
Identify Energy Hogs
Use the Peanut Plug’s built-in monitor to track how much energy your connected devices use. Concerned that older air conditioners, space heaters, refrigerators, or other appliances are actually energy hogs? Don’t wonder: with Peanut Plugs you’ll know.
Set It and Forget It
Schedule your sensors once and they’ll remember your routine until you change your mind. Tell Almond 3, Almond+ or Almond 2015 to turn on your porch light at 6:00 pm and turn it off at 5:00 am. Ask it to ring the alarm when motion is detected in Armed mode. Or have it alert you when your ambient home temperature falls below a level you specify. It’s like a programmable DVR for your house.
Compatible with Almond 3, Almond+ and Almond 2015
Fully compatible with Almond 3, Almond+ and Almond 2015 routers. (Please note, however, that Peanut Plug is not compatible with the first-generation Almond [2012].)
Technical Specifications
- ZigBee HA 1.2
- Free iOS & Android Apps & Browser Interface
- 110V, 60Hz, 15A
- Max Resistive Load: 1920 W (P.F. > 0.8)
- Max Incandescent Load: 1200 W
- Max Motor Load: 1 HP
Support
Need help with our products? Write us at support@securifi.com.
- US and Canada
- Germany
- France
- United Kingdom
- China
- +1-855-969-7328
- +49-800-723-7994
- +33-805-080-447
- +44-800-078-6277
- +886-800-000-152
Pairing Information
Inclusion/Adding
1. Slide battery door open.
2. Insert batteries checking the correct orientation.
3. Press and hold the test button. Keep it held down as you slide the battery drawer closed. You may then release the button.
Exclusion/Removing
1. Slide battery door open.
2. Remove and re-insert batteries checking the correct orientation.
3. Press and hold the test button. Keep it held down as you slide the battery drawer closed. You may then release the button.
Identify Energy Hogs
Use the Peanut Plug’s built-in monitor to track how much energy your connected devices use. Concerned that older air conditioners, space heaters, refrigerators, or other appliances are actually energy hogs? Don’t wonder: with Peanut Plugs you’ll know.
The alarm will remain awake for 30 seconds on inclusion. The alarm supports one association group with up to 5 nodes, and sends its alarms to that group. The alarm supports configuration parameter #1, which has a size of 1, a default value of 0, and when set to 1 causes the device to send double alarm messages.
Resetting the device
If the device is powered up with the test button held down for 10+ seconds, the device will reset all Z-Wave settings and leave the network. NOTE: The device will not remain awake after resetting and will go into standby mode.
Quick-Start Guide
For more information about adding, removing, resetting, monitoring, controlling, or troubleshooting this device, be sure to check our detailed Quick-Start Guide.
Securifi Peanut Plug Quick-Start Guide is available in PDF format.
